Verona VEGCT212FE User Manual download pdf (Page 13)

PRESSURE REGULATOR INSTALLATION

To cooktop

UNLOCK

LOCK

To cooktop

LOCK

Arrow

STEP 1

The elbow connection can be turned in the direction required after

the manifold female pipe fitting has been slackened by using a

wrench.

Then tighten the elbow-manifold female pipe fitting connection by

using a wrench before proceeding with gas connection.

When tightening keep the elbow connection firm i.e. by using an

adjustable pliers or an adjustable wrench (pay attention not to

damage the thread).

STEP 2

Mount the extension pipe to the elbow connection interposing the

gasket supplied and tighten by using a wrench.

When tightening keep the elbow connection firm i.e. by using an

adjustable pliers or an adjustable wrench (pay attention not to

damage the thread).

STEP 3

Mount the 3/8” NPT (conical) male connector to the pressure

regulator and tighten by using a wrench.

Do not over tighten the connector. Over tightening may crack

regulator.

STEP 4

Assemble the 3/8” NPT connector + pressure regulator group to the

extension pipe interposing the gasket supplied.

IMPORTANT: use two spanners to tighten the connection.

Fig. 5.2a

Fig. 5.2b

Fig. 5.2c

Fig. 5.2d



1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Verona VEGCT212FE User Manual Page 13